VOX 3,000 Talking Kitchen Scale Manual

This manual was provided by Blind Mice Mart.

VOX3000 Version 1.0 OPERATING INSTRUCTIONS

The VOX3000 is very easy to operate. However, there are certain caring and operation instructions you should read before your first use. We know taking the time to read these instructions is time consuming, but this scale is a precision instrument and must be handled with the utmost care.

Technical Specifications

Maximum Loading : 3000 grams or 6lb 10 oz.
Resolution : 1 gram or 0.1 oz
Power: 9V Battery

Battery Installation

1. Press and push open the battery cover located at the bottom of the unit.
2. Insert one 9V size battery matching the (+) and (-) polarity covers with the battery. Close the battery cover until it clicks shut. (Negative side of battery goes towards the back of the scale) Note : If the battery symbol appears in the display, it means low battery power. It is time to replace the battery. If the power is too low, it will show “Lo” when power on and then turn off automatically.

Buttons:

There are four operating buttons.
Two are located on the left side of the display and two are located on the right side of the display.

Left side buttons:

Left: TARE Button
Right: Grams/Ounces Button

Right Side Buttons:

Left: Off
Right: On

Voice Off/On switch:

This is located on the bottom of the unit directly under the buttons on the left side.
With switch slid to the left side of the scale, voice is off.
Slide the switch to the right to turn on the voice.

Weighing Function

1. Turn the scale on by pressing the “ON” button (far right button). It will say “Hello!” Once the platform is stable, it will say “I’m ready” and display “Og” .
2. Place the item to be weighed onto the scale platform. The weight will be displayed and read out once the reading is steady.
3. There is a stability indicator “H” in the top left corner of the screen. Whenever the weight iis stable, the “H” will be displayed before the voice reading.
4. Turn the scale off by pressing the “OFF” button (Second button from right). It will say “Good-bye”.

Note : The scale will give warning “Beep, beep,” and show “ERR” if it is trying to weigh above itt’s capacity.
The voice reading function only respondse to the change which is more than 5g.

To select oz or gram

Use the g/oz button (second from left)to select the desired unit.

To use TARE Function

Turn on the scale. Place the empty container on the weighing platform. Press the “TARE” button. Place the items to be weighed into the container. The exact weight of the items will show.

To add the weight value

Press “TARE” button (far left button) to zero the value of the last weighing item before adding the next item being weighed. You can repeat this procedure as according to how many items you have.
Note : The scale will give signal “Beep, beep, beep” to represent negative (-ve) readings when using TARE function.

Auto Power Down

The scale turns off automatically after idle for about 60 seconds.

Switching on/off the talking function

Use the switch on the bottom of the scale to switch on/off the speaker function.

Precautions

1. Do not clean the unit with abrasive or corrosive compound. It may scratch the plastic and corrode the electronic circuit.
2. Do not overload the scale. Not to place anything that weighs more than 3000g on the platform, or it may damage the weighing sensor. |
3. Do not subject the unit to excessive force, shock, dust, temperature, direct sunlight, heavy rain or humidity, which may result in malfunction, shorter electronic life span, battery damage or distorted parts.
4. Do not tamper with the units internal components. It will invalidate the warranty on the unit and may cause unnecessary battery damage and distorted parts.
5. Place product on flat surface before use.